VOLTCRAFT V-Charge Field 60, Руководство по эксплуатации

Страница: 16 / 48

16
Connecting a battery pack to the charger:
1. Connect the charger to the power supply.
2. Connect the charging cable to the XT60 socket on the charger. Ensure that the cable is inserted in the correct
polarity; this is indicated on the XT60 socket on the charger.
Do not connect the charging cable to the battery at this stage. This may result in a short circuit in the charg-
ing cable, which can cause a fire or explosion!
3. Connect the charging cable to the battery, ensuring that it is connected in the correct polarity (red cable =
po, black cable = negative/-).
4. If you wish to connect a multi-cell lithium battery with a balancer cable to the charger, connect it to the balancer
socket on the charger. If the plug does not fit, use a suitable adapter cable or an external balance board (not
included).
Ensure that the cable is inserted in the correct polarity; this is indicated on the charger next to the balancer
connection.
To disconnect a battery, proceed as follows:
1. If you have connected a lithium battery with a balancer cable to the charger, disconnect the balancer cable from
the charger.
2. Disconnect the charging cable from the battery
3. Finally, disconnect the charging cable from the charger.
4. If there is no battery connected to the charger, you can now disconnect the charger from the power supply.
c) General information on the control menu
• From the main menu, use the "INC." or "DEC." buttons to select the desired sub-menu, and then press the "ENTER/
START" button to confirm.
• Use the "INC." and "DEC." buttons to select the desired setting from the sub-menu.
• Press the "ENTER/START" button to change a setting. The selected setting will flash on the display. Use the "INC."
and "DEC." buttons to change the setting (e.g. charging current). Hold down the "INC." or "DEC." buttons to move
through the values more quickly.
• Press the "ENTER/START" button to save the modified setting.
•
Press the "BATT./STOP" button to exit the settings menu. The charger will revert to the main menu.
Press the "DEC." button repeatedly when the battery is charging/discharging to display a range of different
information. The charger reverts to the home screen if no button is pressed for a few seconds.
When a lithium battery with a balancer plug is connected to the charger, you can press the "INC." but-
ton during the charging/discharge cycle to display the voltage of the individual cells. Press the "ENTER/
START" button to go back to the home screen.