ching hollow plug (5.0 x 2.1 cm) is marked with a red
arrow. This red arrow must match the red arrow on the
output cable of the power pack.
Select the right input plug for the wall outlet. In order to
insert the input plug, slide the lock slider in the direction
of the arrow until the input plug snaps out of the
connection terminal. In order to insert the input plug,
place it on the connection terminal and press it into the
terminal until it snaps into place. Plug the power plug
into a wall outlet.
2. 12V adapter cable:
Plug the 12V adapter cable into a
cigarette lighter jack. The existence of a voltage on the
DC plug is signalled by a red LED on the adapter cable.
If the red LED should not go on check the cigarette ligh-
ter jack or the fuse in the connection plug (2 A, quick-
action) for its functionality.
Insert the DC plug of the voltage supply chosen by you
into the inlet jack at the upper front-end face of the
UFC-1 charging set.
18
ning cloth to externally clean the set. Do by no means use
moisture or cleansing agents. Any maintenance or repair
should be solely performed by an expert conversant with
the relevant regulations (VDE 100, VDE 0701).
Specifications
Power supply
: Plug-type power pack 100
– 240 V AC
Cigarette lighter adapter 12
V DC
Charging current (pulsed) : 800mA mignon cells (AA)
300mA micro cells (AAA)
Discharging current
(approx.)
: 80mA
Output voltage
Power pack
: 3 / 4,5 / 6 / 7,5 / 9 / 12V DC
Output current
: 800mA at (12V)
Power pack (230V input) : 1.600mA at (3V)
23
