21
Controls
(see fold-out page)
1 Sensor plug connection (12)
2 Display
3 HOLD/ESC button
4 “POWER” switch to turn the device on/off
5 FUNCTION/SEND button
6 UNIT/LOGGER button
7 REC/ENTER button
8 Tripod socket
9 RS-232 interface
10 Tilt stand
11 Battery compartment
12 Sensor plug
13 Sensor
14 Screw-on magnet
Display symbols
REC
Memory mode symbol
Max
Maximum value display
Min
Minimum value display
Peak
Current peak value
Max HOLD
The max peak value is measured constantly and recorded
H
Data hold, display is locked
RMS
Average value display
VEL
Velocity display
DISPp-p
Max displacement display
ACC
Acceleration display
Battery replacement symbol
Button functions
POWER
Power switch; to switch the device on or off
HOLD
Data hold in normal mode, “forward” in logger mode
ESC
Exits the setup menu
REC
Starts recording
ENTER
Confirmation button used in setup menu
FUNCTION
Max hold function in normal mode, “backward” in logger mode
SEND
Starts data transfer (RS-232 interface)
UNIT
Switches between measuring functions and units
LOGGER
Starts recording in logger mode
