25
1
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
5. Safety Instructions
Read the operating instructions carefully and especially observe the safety information. If you do
not follow the safety instructions and information on proper handling in this manual, we assume
no liability for any resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) General Information
• This device left the manufacturer’s factory in safe and perfect condition.
• Meters and accessories are not toys and have no place in the hands of children.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material
for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
-is visibly damaged,
-is no longer working properly,
-has been stored for extended periods in poor ambient conditions or
-has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
• The meter contains magnetic parts. Keep them away from persons with pacemakers, etc.
• In commercial institutions, the accident prevention regulations of the Employer’s Liability Insurance As-
sociations for Electrical Systems and Operating Materials are to be observed.
• In schools, training centres, computer and self-help workshops, handling of meters must be supervised
by trained personnel in a responsible manner.
• Do not switch the meter on immediately after it was taken from a cold to a warm environment. The
condensation that forms might destroy your device. Allow the device to reach room temperature before
switching it on.
• The vibration sensor must only be applied to surfaces that are free of electrical voltage.
• Also observe the safety information in each chapter of these instructions.
• Consult an expert when in doubt about the operation, safety or connection of the appliance.
