41.VW.2210.3102_BA_V00_EN
VAS 681 003A
47
EN | Operation
Inspection and maintenance areas on the product
The figure below shows the areas on the product that are subject to inspections and
maintenance.
(1)
Entire product
(2)
Control panel
(3)
Plugs and cables
(4)
Ventilation grille
(5)
Wheels
Inspection and maintenance table
The following table provides information about the inspections and maintenance to be
carried out on the product, the corresponding intervals and the persons authorized to do so.
Area
Activity
Person
Interval
1
Visual inspection
Check all stickers on the product to ensure that
they are present, legible and not damaged.
Inspect the plastic casing and the handles for
damage.
I
W
Inspecting the housing screws
Inspect all screws on the housing, the handle and
the wheels to make sure they are tight and none
are missing.
Tighten the screws if necessary.
HV
Y
