Volkswagen sherbourne, Руководство пользователя

Страница: 73 / 103

3.3.3 We strongly recommend that before commencing any treatment an
inconspicuous piece of material is tested for colourfastness and shrinkage. If in
doubt, please contact a professional dry cleaning company. Do not apply
cleaning solvents to velour piping, otherwise the flock will be removed.
4 WORK SURFACES
4.1 Laminated work surfaces are fitted to the tops of all furniture units. Whilst these
are hard wearing, hot pans should not be placed directly on these surfaces, since
damage may result.
5 STAINLESS STEEL COMPONENTS
5.1 External
5.1.1 In the event of discolouration of the stainless steel roof rack and ladder, this
should be removed with T-Cut or any other mild abrasive and the surface
protected with WD40 or a similar product.
5.2 Internal
5.2.1 Do not clean stainless steel fittings i.e. splash plate and sinks with bleach since
this reacts with the stainless steel and may lead to corrosion.
6 FURNITURE
6.1 Furniture should be cleaned with a proprietary furniture polish periodically. Any
water marks that may occur on the hardwood edging of the furniture units should
be removed by use of fine grade wire wool and furniture wax.
6.2 Heavy stains may need to be sanded out and the edging re-polished with a
proprietary varnish (Ronseal etc.). The high gloss finish is achieved by using wire
wool and wax.
7 GAS INSTALLATION
7.1 All gas vents and flue pipes should be periodically checked for damage and
should be kept free from dirt.
7.1.1 Blocking of vents or flues is extremely hazardous and should be avoided at all
times.
7.2 Gas Appliance Ignitors
7.2.1 It is advisable, periodically, to check visually the ignitors on hobs, grills and ovens
are sparking correctly.
7.3 Annual Inspection
7.3.1 The gas installations should be inspected annually by qualified personnel. If in
doubt contact your supplying Auto-Sleeper dealer. Modifications to the gas
systems should not take place unless carried out by qualified technicians.
8 SEAT RESTRAINTS
8.1 Seat restraint mountings should be checked for tightness annually and re­
tightened if necessary to a torque setting of 40 Newton Metres.
8.2 In the event of any impact of 25 mph or over in which seat belts have been worn,
they must be replaced before the vehicle is used again.
-73-
___________ J
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans