48-38
Inner sealing ring for toothed rod,
pulling out
- Install puller for sealing ring far enough so that
the marking on the tool (arrow) matches the
housing edge (only then will the claws engage
behind the support ring)
- Spread claws -2- of the tool by turning the
spindle forcefully
Note:
When introducing the tool, make sure that the
cylinder race is not damaged
1 - Support ring
2 - Claws
3 - Sealing ring
4 - Tool 3315/11
Page 38 of 99
Steering
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1