40-80
Triple-rotor joint, assembling
- Slide small diameter boot clamp onto shaft.
- Slide triple-rotor joint boot onto shaft.
- Slide triple-rotor joint housing onto shaft.
Mounting triple-rotor star
Note:
The side of the star with a chamfer (arrow) goes onto
the axle shaft splines first.
- Place triple-rotor star on axle shaft according to
previously marked position.
- Install circlip and make sure that it is correctly
seated.
- Install rollers according to previously marked
positions.
- Push triple-rotor joint housing over rollers and
secure (clamp housing in vise).
Page 80 of 82
Front Wheel Suspension, Shafts and Axle
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1