Volkswagen 000 071 105 J Скачать руководство пользователя страница 5

Страница: 5 / 12

Distributed by Volkswagen Zubehör GmbH Printed in Germany by Volkswagen Zubehör GmbH 14.09.2017 -15-

Fitting bicycle carrier

Caution

The towing hitch must be suitable for use with a bicycle

carrier:
• D-

gure of ball coupling (see “Technical data” on

page 14)

•

Material of towing hitch at least St 52-3 (see type plate

on towing hitch)

Non-observance may allow the bicycle carrier along with the

mounted bicycles to loosen and detach from the vehicle and

cause injuries to you, the occupants of the vehicle and/or

cause an accident.
The ball coupling must be cleaned and degreased before

tting the carrier.

Caution

The revised vehicle dimensions (length, width, height) due to

the

tting of the bicycle carrier may endanger you and other

persons, or cause serious damage if the revised dimensions

are not taken into account.
Remember revised dimensions of vehicle when entering

restricted areas and entrances etc. Take extra care when

reversing.

Caution

Check lighting equipment is working perfectly before every

journey, otherwise the result may be an accident.

Figure 1

1. Open cover of stowage bag, if carrier is stowed in a

bag. (The bag is available as a separate item and is not

included in the items supplied.)

2. Hold the bicycle carrier (1) as shown and press the

securing lever (2) (upper enlargement). The mounting folds

outwards (lower enlargement).

Figure 2

1. Hold bicycle carrier (1) vertically and slide the mounting (4)

on to the ball coupling (2) of the towing hitch.

Note

Ensure the mounting (4) remains in the horizontal position

(enlargement) when sliding it into position. When the

mounting is difficult to slide on or when the bicycle carrier

cannot be folded out, then remove the bicycle carrier from

the ball head and then slide it back on again. Do not use

force!

2. Tilt the bicycle carrier (1) downwards until the securing

lever (3) audibly engages.

The red marking on the securing lever (3) must no longer

be visible.

3. Check that the bicycle carrier (1) is parallel with the

bumper and approximately parallel with the ground.

Check that the bicycle carrier (1) is seated securely by

shaking the carrier. If necessary, remove the bicycle carrier

(1) and mount it again.

Figure 3

1. Lock the bicycle carrier (1) with the key (2) (observe arrow

on lock cylinder) and remove key (2).

2. Pull connector (3) out of connector holder on wheel rail (4).

Содержание 000 071 105 J













Результаты поиска

Содержание 000 071 105 J

Отзывы:

Похожие инструкции для 000 071 105 J

Бренды по названию

Популярные бренды

Volkswagen 000 071 105 J, Руководство по установке

Результаты поиска

Содержание 000 071 105 J

Отзывы:

Похожие инструкции для 000 071 105 J

Бренды по названию

Популярные бренды