Volkswagen 000 071 105 J Скачать руководство пользователя страница 11

Страница: 11 / 12

Distributed by Volkswagen Zubehör GmbH Printed in Germany by Volkswagen Zubehör GmbH 14.09.2017 -21-

Changing bulbs

Note

Before changing bulbs: ensure vehicle ignition is switched off

and that the lighting equipment connector is removed from the

towing hitch electrics socket. Non-observance may cause a

short circuit or other damage. Please have the bulbs changed

by a specialist workshop if unsure.

Note

The changing of bulbs is described and shown for the left-hand

rear light on the bicycle carrier. The right-hand rear light is

similar.

Figure 17

1. Press locking devices (2) and pull rear light (1) out of

holder (3).

Figure 18

1. Remove cover (2) in direction of arrow.
2. Remove rear light (1) completely from holder (3).

Figure 19

1. Unscrew screws (1) and remove lens (2).

Figure 20

1. Press defective bulb lightly into holder (2), (4), (6) or (7).
2. Remove bulb (3) from holder (4). Turn bulb (1), (5) or (8)

approx. 90° anticlockwise in holder (2), (6) or (7) and pull

out.

3. Press new bulb lightly into

tting (2), (4), (6) or (7).

4. Insert new bulb (1), (5) or (8) into holder (2), (6) or (7)

and additionally turn approx. 90° clockwise in holder. Bulb

details, see page 14.

Note

Touch glass of new bulbs only with a clean cloth and insert into

holder.

5. Fit lens again and tighten hand-tight, see

gure 18.

Содержание 000 071 105 J













Результаты поиска

Содержание 000 071 105 J

Отзывы:

Похожие инструкции для 000 071 105 J

Бренды по названию

Популярные бренды

Volkswagen 000 071 105 J, Руководство по установке

Результаты поиска

Содержание 000 071 105 J

Отзывы:

Похожие инструкции для 000 071 105 J

Бренды по названию

Популярные бренды