SmartCrystal™ Cinema
Neo Dual
n ° : MUV1600178
Version : A01
USER MANUAL
Date : 10/05/2019
This document is the property of the Co VOLFONI and may not be reproduced or disclosed without permission
16
The LED for “state of motor”
illuminates in red
1-
Fix the handle as described page 13
2-
Pull out the LCD’s frame at the maximum
3-
Push the LCD’s frame towards the inside till you feel the
mechanical connection
4-
If issue remains the same, please contact directly your
reseller or integrator and do not touch the electronics of
the device
The LED for “state of fan”
illuminates in red
In such case, please contact directly your reseller or integrator and
do not touch the electronics of the device
You cannot control the system
remotely (NOC)
Follow procedure :
http://volfoni.com/en/smartcrystal-dual-a/
Remote Connection Guide
In case of device needs to be
repaired in our offices
Equipment (modules and cables) should be returned in
their original packaging along with the original proof of
purchase
Equipment that is broken or scratched is not covered under
warranty
Volfoni does not guarantee uninterrupted or error-free
operation of the product
IF YOU DO NOT NOTICE ANY IMPROVEMENT FURTHER TO THE SUGGESTED
SOLUTIONS, PLEASE CONTACT YOUR SUPPORT
VIII.
IMPORTANT SAFETY RECOMMENDATIONS
Protect all parts of the 3D system from direct sunlight, heat or water.
Extreme conditions may alter the product’s performance.
Do not modify the electrical or mechanical components of your 3D
system.
Do not apply force to the window of the polarization modulator.
Do not touch the polarization window.
Avoid vibrations and shock.
Use a clean soft cloth when cleaning the polarization modulator to avoid
scratching.
