SmartCrystal™ Cinema
Neo Dual
n ° : MUV1600178
Version : A01
USER MANUAL
Date : 10/05/2019
This document is the property of the Co VOLFONI and may not be reproduced or disclosed without permission
11
When not using the SmartCrystal™ Cinema, put the system in 2D mode to protect the
polarization window from dust and damage, and thereby increase product
longevity.
2.
On / Off switch
Put this button in position ON to power the SmartCrystal™ Cinema Neo
Dual and begin operating the system. Put it in position OFF when you want to
stop using the 3D system.
3.
Manual mode
There is one button that moves the polarization window of the
SmartCrystal™ Cinema Neo left and right. When the system is powered,
press this button and the polarization window will emerge from its
encasement (3D mode). Press this same button when you want to stop
using the SmartCrystal™ Cinema, and the polarization window will go back
inside its encasement (2D mode):
This button blinks in green when the polarization window is moving
This button is green continuously when the 3D system is open and the
polarization window is out of the encasement
This button is not illuminated when the polarization window is in 2D
mode.
4.
Network connection – RJ45 plug
The NOC connector allows the system to be connected to a central
network in order to retrieve information and perform remote operations on
the SmartCrystal™ Cinema Neo Dual (e.g., monitoring, remote control,
etc.).
There are two different modes:
Manual mode: the user interface of the SmartCrystal™ Cinema
Neo Dual directly controls the operation of the 3D system.
NOC mode: information and operations are automatically
sent from the server via the central network:
http://volfoni.com/en/smartcrystal-
dual-a/: Remote Connection Guide
