6. Basic
58
AdminGuide-Voss12-1.docx
Figure 6-28. Change FXS Setting View Frame
■
Line Config
Extension:
choose an extension number for this FXS.
Dial Timeout:
Input time which will dial automatically after the set time
without pressing send button.
Digit Timout:
Maximum time interval between digits.
Hook Flash Interval:
This function is used for putting the current call on
hold (press Hook switch rapidly and off). Input time in milli-second for Hook
switch interval.
RX Gain:
Set up the volume from the Line to VOSS12 (for phone).
TX Gain:
Set up the volume from VOSS12 to the Line (for PSTN network).
CID RX Gain:
Set up standard level for recognizing CID information when
receiving CID.
CID Type:
Set up CID type as Korea: Telcordia, Erupe: ETSI, England: SIN
227, Japan: NTT
Echo Cancellation:
Echo is listening user own voice during a call, there are
two echo cancellation methods; Type1 and Type2(ES).
Type1 – Normal echo cancellation method.
Type2(ES) – An Echo Cancellation which is added suppressor. So, this
improves echo cancellation function but can’t use Double–Talk function.
VAD/CNG:VAD/CNG:
Click if using VAD(Voice Activity Detection) and
CNG(Comfort Noise Generation).
Country:
Select current Country
Dial Pattern:
Input a dial pattern for outgoing call. (Refer to the Appendix B)
Line Card Reset
While using VOSS12, if its line care has a problem, then don’t need to reboot the
system, just need to reset the line card. To reset the line card, follow the instruction
below.
1)
Go to [Basic]/[Line] menu.
