6. Basic
AdminGuide-Voss12-1.docx
49
■
Member Config
For this incoming group member, only user(s) can be added. To add a user,
select a member name and click
Add
button. To delete a user, click right
X
on
the user number.
■
Call Forwarding: input call forwarding number according to the following
case.
Always:
Always forwarding all the incoming calls.
Busy:
Forwarding calls when all the lines are busy.
No Answer:
among group members, if nobody answers the incoming call
then the call will be forwarded to this number.
Error:
Forwarding calls when the system has error.
Timebased:
Forwarding calls in accordance to the set time.
2)
Click
Update
button to save the setting.
Change Outgoing Group
To change outgoing group, follow the instruction below.
1)
Go to [Basic]/[Group]menu.
Figure 6-20. Change Outgoing Group View Frame
■
Group Config
Dial Type
Linear:
Placing calls in accordance to the pre-registered order. But this
type always starts placing calls from the 1
st
registered number.
Circular:
This type remembers the last calls placed line, and tries placing
call from the next registered line which was not used.
User Reception VSP:
each user has individual VSP.
