1. System Structure and Set-up
10
AdminGuide-Voss12-1.docx
Temperature: 0~40
℃
Humidity: 10%~90%
The product should not be exposed to direct sunlight. Place in cooling and clean
place to free from dust.
■
Input/Output Voltage
VOSS12 power is used 12V direct current. Provided AP power adaptor is used for
VOSS12
The socket outlet should be located where is protected from accident.
Choose a plug which is the right specification for VOSS12 only.
VOSS12 input and output voltage is as below.
Input:
AC 100/240V, 50/60Hz
Power Consumption:
Max 20Watt
Clean the wet floor before installing VOSS12.
If the cable is spoiled, be careful handling this cable.
The radius of curvature should be more than 6 times of cable length and there
should not have any overlapped point.
Do not place near high-voltage cable.
Unpack
After finding a location to set-up VOSS12, then unpack VOSS12 and check the
components as below
Separately wrapped VOSS12 main device
Power adaptor and adaptor cable
Ethernet UTP cable(1.5m):
RJ45- CAT 5
Figure 1-6. VOSS12 Package Component
System Assembling
Follow the instruction below to assemble VOSS12.