7
Voice
Digital Audio Player VGP30
User Manual
gear
Some desktop telephones will not work immediately...
90% of the desktop phones will not need any technical assitance as they will be wired as shown below:
1 2 3 4
1 2 3 4
To handset of
desktop phone
To desktop
phone base
The RJ-9 connector is carries 4 contacts used
to connect the telephone circuits between the
PCB of the phone and the handset. Often a
curly cord is wired between the RJ-9 connectors.
If the international standard is followed, then
connector pins 1 and 4 are used to connect the
microphone of the receiver and pins 2 and 3 will
connect the loudspeaker inside the handset.
Visit www.voicegear.be for a compatability list or e-mail [email protected]
Trigger Start button
Track Selector button
Preparing and testing your set up:
After having inserted the flash card and switched the power
on, select a track for playback and make a call to a nearby
cell phone. Press the trigger switch and listen to what you
hear on the cell phone.
The volume output is a combination between the master
volume (centre of front panel) and the volume knob on the
right hand side, next to the RJ-9 connectors.
During the playback of the MOH, the microphone of the
desktop phone is being muted so your correspondent will
not hear you while he is on-hold. To resume the conversation
press the Trigger button to stop the playback over the phone.
How to make the other 10% work...
If your VGP30 needs to be adapted, this can be done by a qualified telephone Engineer. Alternatively, your distributor
can supply a replacement connection lead, or pin out information.
How to operate the VGP30 with your telephone
You can install the VGP30 next to your telephone so that you can see the track number as appearing on the LED screen
as well as the green trigger pilot light.
The advantage of triggering MOH files:
MOH are generally played in loop, accessing the file at random. When a MOH is “triggered”, the file is played from the
very beginning, starting with the most important messages, followed by the messages of decreasing importance.
By using the track selector, a different track can be trigger played, containing additional information or if when e.g,
different languages may be needed.
