Voice Systems Galileo, Руководство пользователя

Страница: 16 / 74

86
CONNECTING AND USING YOUR
MICROPHONE
Connect your microphone to the [MIC IN] plug on the Galileo side panel. As a first step it
is necessary to regulate the input signal gain to avoid excessive distortions. To do this
proceed as follows:
Set the [GAIN] pot in a middle position and the [MIC] slider pot in the position where you
would like to have optimum volume. Please note that the slider [MIC] controls only the
volume, and it is not responsible for any distortion. At this point, trim the [GAIN] pot so that
the [OVD] LED blinks occasionally while having a loud signal (e.g. shouting).
NOTE
For a better microphone performance we suggest to use a balanced connection.
USING HEADPHONES
To connect an headphone set use the [PHONES] input plug. The system will automatically
detect the presence of headphones, showing on the display the following page:
Use the [DATA ENTRY] encoder, when the main page is displayed, to set the desired
headphones volume.
NOTE
The [MASTER] slider does not regulate the headphones output level.