2
3
Arming and
Disarming
Arming and
Disarming
8.2.3
Mechanical Seal Disassembly, Rotary Face (Photographic Sequence No. 3)
•
When disassembling the seal (fig.3 - 11), the spring should be removed first.
•
Then the rotating element is disengaged, being very careful not to damage its faces.
•
This task can be performed with the support of mechanical elements.
8.2.4
Disassembly of the Union Body (Photographic Sequence No. 4)
•
Remove the fastening bolts (fig.3 - 25.13) between the coupling body and the motor.
•
Subsequently, remove the coupling body (fig.3 - 3), being careful not to damage the stationary element
of the mechanical seal located between the coupling body and the monoblock shaft.
•
The shaft clamp (fig.3 - 23) and the water stop rubber (fig.3 - 38) are removed after the coupling body
has been disassembled.
Photographic Sequence Nº 3
Photographic Sequence Nº 4
