9
8
BEFORE YOU START
INTRODUCTION
Monitor Components
List
1.Blood Pressure Monitor
(TMB-1776)
4.User manual
2.Cuff (Type BF applied part)
(22cm~42cm)
3. 4×AA batteries
Component list of
pressure measuring system
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
CUFF
AIR HOSE
AIR CONNECTOR PLUG
LCD DISPLAY
MEMORY BUTTON(DOWN)
START/STOP BUTTON
BATTERY COMPARTMENT
DC POWER SOCKET
MEMORY BUTTON(UP)
In order to get the best effect and protect your monitor,please use the right
battery and special power adaptor which complies with local safety standard.
• Open the battery cover.
• Install the batteries by matching
the correct polarity, as shown.
• Replace the battery cover.
Installing and Replacing the Batteries
CAUTION
CAUTION
Replace the batteries whenever the below happens
The shows
The display is dim
The display does not light up.
The Choice of Power Supply
1
.Battery powered mode:
6VDC 4×AA batteries
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
2 .AC adaptor powered mode:
6V 1A (Not included)
(Please only use the recommended AC
adaptor model).
Please unplug the adaptor to depart from
the using utility power.
AC adaptor
5.Flannelette bag
