Vmac RAPTAIR-MF D600007, Руководство по установке

Страница: 20 / 68

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-800-738-8622 Local: 1-250-740-3200
Fax: 1-250-740-3201
18
3.1.3 Alternate diesel fuel supply
Kubota recommends using a fuel prefilter / water
separator with a maximum rating of 50 microns in
addition to the 15 micron fuel filter.
Always adhere to all relevant regulations when
connecting to the vehicle’s fuel system.

If a larger fuel capacity is desired, an alternate supply can be
used, such as the truck fuel supply (when a diesel truck is used).

Install a fuel filter with a maximum rating of 15 microns.

Connect supply and return fuel lines from the diesel drive to an
auxiliary tank. The supply line is 5/16" and the return line is
3/16".
If the auxiliary fuel tank is located below the diesel
drive unit a fuel priming pump is recommended in the
supply line.
When plumbing into a truck diesel supply, avoid
connecting the RAPTAIR MF fuel supply to the lowest
point of the truck tank.
3.1.4 Exhaust system
It is required that the installer supply an adequate exhaust pipe to
suit the needs of their application. The muffler is supplied with a 1-
5/8” ID outlet.
When installing an exhaust pipe the following steps are to be
followed:

Connect a suitable 1-
5/8” exhaust pipe with an exhaust clamp.

Ensure that if the exhaust is pointing upwards there is a suitable
flapper/cover to prevent water from entering the exhaust system.

Ensure the exhaust pipe has suitable clearance and does not
come in contact with anything.

If extending the exhaust externally to the unit a suitable flex
coupling or flex pipe must be used to prevent damage to the
muffler and exhaust system of the unit.