Vmac RAPTAIR-MF D600007, Руководство по установке

Страница: 13 / 68

VMAC
– Vehicle Mounted Air Compressors
Toll Free: 1-800-738-8622 Local: 1-250-740-3200
Fax: 1-250-740-3201
11
Safety features include:
•
200 PSI relief valve in separation manifold
•
blow-down valve to discharge system pressure on shutdown
•
temperature safety sensors in compressor oil, separation
manifold and engine coolant
Do not disable or bypass the over-temperature
shutdown circuits. Failure of the shutdown system
could result in equipment damage, injury or death.
A liquid-to-liquid cooler maintains operating temperatures in an
optimal performance range which increases system durability and
reduces the temperature of the compressed air.
1.5.2 Generator Option
The generator produces both AC and DC power. The AC portion of
the generator produces 3 phase power. Each leg of the generator
goes through the 30A 3 phase breaker. Two of the legs go through a
20 A breaker and to 120V GFCI receptacles found on the panel of
the generator. One leg goes to a 240V 30A plug. There is also a 3
phase plug that is capable of transmitting the full power of the
generator.
The generator switch disables the AC and DC output of the
generator and will shut off any plugs on the unit.
1.5.3 Welder/Battery Boost/Charger
The welder is capable of producing 300A DC. There is a thermal
switch inside the generator to protect against thermal damage. If the
thermal switch is tripped the light will illuminate on the user panel
that is indicated as “welder alarm”. If the DC thermal switch is
tripped the generator will continue to produce AC power.
The welder selection dial performs the following functions:
•
Weld Mode: This setting produces CC output for stick
welding
•
48V: This is a CV mode that could be used to power a MIG
pack. Use the current control dial to limit the amount of
current.
•
36V: CV mode. Use the current control dial to limit the
amount of current.