background image

3

18

To turn color channels off and on:

1.  From the COLOR CALIBRATION menu, use the 

Arrow buttons 

to highlight 

Color Tuner, and then press OK. The COLOR 

TUNER menu is displayed.

2.  Use the 

Arrow buttons on the remote to highlight RedGreen

or 

Blue.

3.  Press the 

OK  button to turn the color channel off or on. An X 

appears over a color channel that has been turned off.

4.  Use the 

Arrow buttons to highlight another color channel to 

turn off or on. Only two color channels can be turned off at the 

same time.

5.  When you have finished with the color channels, press the 

Exit 

button.

Color Tuner

Red

Green

Blue

Cyan

Magenta

Yellow

Hue

0

0

0

0

25

-14

Saturation

-1

5

-4

0

-2

0

Brightness

-24

0

-22

0

0

0

Offset

0

0

0

Gain

0

0

0

To adjust the 11 Point White Balance settings:

1.  From the Color Tuner menu, use the 

Arrow buttons to 

highlight 

Color Tuner, and then press the Left/Right Arrow 

buttons until the 11 POINT WHITE BALANCE menu is displayed.

2.  Use the 

Arrow buttons on the remote to highlight the Gain 

and 

Color values you wish to adjust. Press the OK  button and 

use the 

Left/Right Arrow buttons to adjust the value. When 

you are finished, press the 

OK button to save the setting.

3.  When you have finished, press the 

Exit button.

11 Point White Balance

Gain

Red

Green

Blue

5%

0

0

0

Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the HSB color and 11 

point white balance, turn color channels off for testing, and display 

color bar, flat, and ramp test patterns.

To adjust the HSB color settings:

1.  From the COLOR CALIBRATION menu, use the 

Arrow buttons 

to highlight 

Color Tuner, and then press OK. The COLOR 

TUNER menu is displayed.

2.  Use the 

Arrow buttons on the remote to highlight the Hue

SaturationBrightnessOffset, or Gain of the color you wish 

to adjust. Press the 

OK  button.

3.  Use the 

Left/Right Arrow buttons to adjust the value. When 

you are finished press the 

OK button to save the setting. 

4.  When you have finished adjusting the color tuner settings, 

press the 

Exit button.

Color Tuner

Red

Green

Blue

Cyan

Magenta

Yellow

Hue

0

0

0

0

25

-14

Saturation

-1

5

-4

0

-2

0

Brightness

-24

0

-22

0

0

0

Offset

0

0

0

Gain

0

0

0

The Color Tuner, 11 Point White Balance, and test 

patterns allow technicians to manually calibrate the TV. 

Calibration requires specialized training, an input with 

precisely set colors, and a specialized light meter.

Содержание P55-F1




















































Отзывы: