viZaar VUCAM XO, Руководство по эксплуатации

Страница: 6 / 47

WARNING
The device must be checked annually by the
manufacturer or an authorized third party for
compliance with the electrical safety instructions
obligatory at the usage site and conformance
with the as-delivered condition of the device.
The device must not be connected to the
electric supply mains or otherwise operated
after the ascertainment of a defect or any
deviation from the as-delivered condition.
This is valid, in particular, if the device has
tumbled or fallen down or was exposed to a
liquid.
Never allow the device to be operated without
supervision. For safety reasons, it is necessary
to switch-off the machine during pauses.
Using the videoprobe nearby radioactive
energy sources or in areas which may cause
radioactive contamination demands strict
compliance with the corresponding health
and safety regulations. Constant and/or short
exposure to radioactivity may limit the life-
time / performance of the videoprobe in
dependence of the dose output.
For increasing your own safety against electric
shocks with risk of injury or loss of life, the
device must always be connected and operated
via a residual current circuit breaker system
or an isolating transformer. This can in any
case be a compulsory condition depending
upon the operating environment. For this,
consult your responsible safety in-charge or
the accident protection measures in force in
your respective country.
05
06
07
08