viZaar VUCAM XO, Руководство по эксплуатации

Страница: 39 / 47

3.1 Optional side tip adapter
To change the tip adapter remove the protection
ring from the probe head. Carefully mount and
remove the parts. Never use force for this procedure.
In case of doubt, contact our service to get further
instruction. For further information refer to chapter
“1.5 Mounting the protection ring“ on page 11.
Continue with following instructions:
1. Prepare the probe of the VUCAM
®
XO system.
2. Put the tip adapter onto the probe head and turn
it clockwise by holding the ribbed end) to mount
the tip adapter.
To remove the tip adapter of the probe head,
please proceed in reverse order and turning the
tip adapter anti-clockwise.
3.2 Optional car charger
Connect the auto charger cable with the charger
connection of your VUCAM ® XO (page 05, 7. Power
supply / charger connection). Connect the USB
auto charger module with the car’s cigarette-lighter.
3.3 Optional battery pack
To remove the batteries from the system, please refer
to chapter “1.8 Changing the batteries“, page 12. To
charge the batteries refer to pictures 3.3a to 3.3b.
Charging time: approx. 1,5 - 2 hours.
Battery operation time: approx. 2,5 hours
1. Connect the batteries to the battery charger.
3 OPTIONAL ACCESSORY EQUIPMENT
24
ATTENTION! Never use the probe without the
protection ring! Operation without the
protection ring may damage the probe!
ATTENTION! Do not use force to screw the tip
adapter onto the probe head!
NOTE! Pay attention to keep the inside structure
of the side tip adapter free of dirt!
NOTE! Never use the camera without tip
adapter! Not recommended use may damage
the probe!
ATTENTION! Due to small dimensions, the
threads of the probe and the protection ring
/ tip adapters are very delicate. To prevent
any damage, pay attention to dirt in the threads!
ATTENTION! The change of the tip adapters
must be performed by briefed personnel only!
ATTENTION! The batteries can’t be loaded
inside the VUCAM
®
XO system at ambient
temperature below 0°C to over +60°C!