viZaar VUCAM XO, Руководство по эксплуатации

Страница: 23 / 47

1.4 Initial operation
Before starting the system, choose operation with
batteries or power supply. For operation with
power supply, connect the power supply to the
connection cable. The connection cable must be
connected to the VUCAM ® XO system.
For operation with batteries insert the batteries
into the VUCAM ® XO. Please refer to the chapter
“1.8 Changing the batteries“.
Proceed with starting the device:
1. Press for min. 2 seconds.
to start the device. The system will start in the
operation menu.
2. Before starting to capture inspection data,
please perform a white balance by pressing
and confirming with “OK“.
Confirm the white balance. The white balance
symbol flashes while performing.
3. After successfully performing white balance,
start your inspection.
4. By pressing
you will capture a digital image.
5. Press
to start recording a digital video. The video recording
icon will flash red. Pressing
again will stop the video recording.
6. To make a snapshot during the video recording,
press
Repeat by pressing the button again. After taking
the snapshot, the video recording will autmatically
continue.
7. To check your last captured data (image and/or
video), press
1 STRUCTURE AND START-UP
10
ATTENTION! The batteries can’t be loaded
inside the VUCAM
®
XO system at ambient
temperature below 0°C to over +60°C!