viZaar VUCAM XO, Руководство по эксплуатации

Страница: 25 / 47

1.6 Flashback recording
Many areas of interest are passed by while inspec-
ting. By the time deficiency is realized, revisits are
needed for analysis and documentation. Save time
and money with VUCAM ® constantly buffer captu-
ring. By pressing
the last 15 seconds are already saved with the on-
going recording.
To just save the last 15 seconds without adding on-
going data, press
twice
1.7 Changing the tip adapter
To change the tip adapter remove the protection
ring from the probe head. Carefully mount and
remove the parts. Never use force for this procedure.
In case of doubt, contact our service to get further
instruction.
Continue with following instructions:
1. Prepare the probe of the VUCAM
®
XO system.
2. Put the tip adapter onto the probe head and turn
it clockwise by holding the ribbed end to mount
the tip adapter.
To remove the tip adapter of the probe head,
please proceed in reverse order and turning the
tip adapter anti-clockwise.
1.8 Changing the batteries
To change batteries of the VUCAM
®
XO system,
follow further instructions and images.
1. Remove the battery cover on the back of the
VUCAM ® XO touch screen.
1 STRUCTURE AND START-UP
12
ATTENTION! Never use the probe without the
protection ring! Operation without the
protection ring may damage the probe!
1.6b
1.6c
ATTENTION! Do not use force to screw
protection ring onto the probe head!
ATTENTION! Due to small dimensions, the
threads of the probe and the protection ring
/ tip adapters are very delicate. To prevent
any damage, pay attention to dirt in the threads!
ATTENTION! The change of the tip adapters
must be performed by briefed personnel only!