2) Loosen the two screws on the side of the finder body to detach the finder bracket from the
XY Dot Finder. (The finder bracket can be removed with a back and forth slide motion as you
loosen the screws.)
3) Attach the low-profile finder-base on the back of the finder body and tighten the two screws
securely. (The low-profile finder-base has a front and rear, but you can attach it either way
according to your needs.)
4) This XY Dot Finder is not compatible with the previous Vixen Dot Finder models.
Tips on using the XY Dot Finder
Loosening the alignment clamp will allow you to turn the XY Dot Finder to 180 degrees
laterally. This may facilitate your viewing through the eyepiece if the alignment clamp causes
interference. Please change the orientation of the alignment clamp if this is the case.
