3) Unfasten the alignment clamp by turning counter-clockwise and set the finder body
roughly in parallel with the telescope tube. Then, fasten the alignment clamp by turning
clockwise.
4) Choose a conspicuous target in the distance and place the target in the center of the field of
view of the telescope at low power.
Please read the instruction manual supplied with the telescope to understand how to align the finder
scope.
Adjusting and Aligning the XY Dot Finder
1) Activate the red dot by turning the brightness dial to clockwise. The brightness of the red
dot can be adjusted freely by turning it to obtain brightness suitable for viewing.
The red dot goes off when the dot marked on the brightness dial is aligned with the dot on the finder
body.
2) Confirm the red dot can be seen in alignment with the sight line and the guidepost in the
lower middle of the zero-power objective lens. Then, point the red dot toward your target
object as you look through the telescope in order to align the field of view of the XY Dot Finder
with the field of view of the telescope.
