9 Horizontal fine adjustment
10 Zero-power objective lens (inside)
11 Guidepost (inside)
12 Finder holding plate (underneath)
13 Finder bracket
14 Mounting block
15 Battery container cover
Attaching the XY Dot Finder to the telescope tube
1) Loosen the finder bracket fixing screw fully to allow insertion of the dovetail mounting
block of the XY Dot Finder unit.
2) Attach the XY Dot Finder to the telescope as shown in the figure 2, tighten the finder
bracket fixing screw securely (The mounting block is made of plastic and over tightening the
fixing screw may cause damage.).
