Vixen APZ, Инструкция по эксплуатации

Страница: 21 / 32

APPLICATION
11
12
13
14
Manual slow motion control module
Manual slow motion
control module
3mm Allen wrench
4mm Allen wrench
Align the
screw holes
Large side of the counter hollow
Manual slow motion control module
Manual slow motion
control module
3mm Allen wrench
4mm Allen wrench
Align the
screw holes
Large side of the counter hollow
With holding the declination body in one hand, replace the
two socket head cap screws that were removed in step 3
above.
Tighten the screws with the 4mm Allen wrench securely.
Attach the declination body assembly onto the AP polar
a xis body unit so that the electrical contact on the
declination body fits into the sunken portion on the manual
slow motion control module.
Rotate the manual slow motion control module so that the
screw holes (larger holes with no thread) are aligned in
tandem. Replace the three socket head cap screws in
place.
Tighten the screws with the 3mm Allen wrench securely.
Attach the manual slow motion control module onto the AP
polar axis body unit so that the center hollow (large side)
of the module fits snugly onto the center protruded portion
of the AP polar axis body unit.
AP polar axis body unit AP polar axis body unit
Electrical contact Electrical contact
Declination body Declination body
Declination body Declination body
Declination body Declination body
Sunken portion Sunken portion
21