Innovative UltraRack
Paint Stand •
Assembly Instructions
Install Total Lock Caster Wheels.
Secure to Support Tubes P/N 220-001.
Slide Inside Frame Post
(P/N 220-004) into Frame post.
Install Index Plate lower bolt
(finger-tight only).
Install Trunnion Bracket
(P/N 220-005) using
3
⁄
8
x 2
cap
screw, through upper
Index Plate hole.
Attach Locking Hex Nut
to the 2
Cap
Screw from step 5.
Do not overtighten.
Trunnion Bracket should rotate freely.
Now firmly tighten lower Index Plate bolt.
Put left and right Extension arms
into storage position.
For use with
pickup tailgates only.
Insert Support Arms.
See arrows - hooks point away from
center of UltraRack.
Insert T-Frame Tubes.
Upper T-Frame P/N 220-007.
Lower T-Frame P/N 220-006.
U.S. PATENT 7,448.606
1
5
6
7
8
9
™
Attach Support Tubes
to Frame Base
tube (P/N 220-002); tighten firmly.
2
Attach Frame Post
(P/N 220-003)
to Frame Base Tube; tighten firmly.
Insert T-handle.
3
4
Insert T-Handle
lower T-Frame
Upper T-Frame
Top Hooks UP
Bottom Hooks DOWN
Insert T-Handle
Height Adjustment
