Vixen APZ, Инструкция по эксплуатации

Страница: 20 / 32

APPLICATION
7
AP polar axis body unit
8
Azimuth adjustment screw
Azimuth adjustment screw
Azimuth adjustment screw
AP polar axis body unit
Azimuth adjustment screw
Azimuth adjustment screw
Azimuth adjustment screw
9
10
Place the AP polar a xis body unit on the tripod head.
Loosen the azimuth adjustment screws in advance by turning
the azimuth adjustment knobs as shown in the figure so that
a space is opened for the metal post between the screws.
Position the mount base of the AP polar axis body unit so
that the two azimuth adjustment screws come above the
metal post. Place the mount base so that the center
projection on the bottom of the mount base fits the center
hollow on the tripod head.
With holding the AP polar axis boy unit in one hand, raise
the center column in another hand so that the top of the
column fits the bottom of the mount base. Turn the center
column counter-clockwise to screw it on the mount base until
secure.
Tighten the azimuth adjustment knobs on the mount base
so that the two knobs are equally tightened.
Metal post Metal post
Center column Center column
20