Vixen APZ, Инструкция по эксплуатации

Страница: 12 / 32

Do not loosen the lock screw and safety screw too much in balancing.
This could cause telescope tube to fall and lead to injury or damage to
your equipment.
4
1
2
3
Balancing the telescope tube with dovetail slide bar:
PREPARATION
Level the telescope tube as shown in the figure. Release the
telescope tube to see if it keeps the position as it stands.
Readjust the balance if the telescope tube starts turning as you
release it.
Loosen the lock screw and safety screw on the mount head that
hold the telescope’s dovetail slide bar and slide the dovetail slide
bar either forward or backward until the telescope tube remains
stationary.
Tighten the lock screw to hold the telescope tube. Swing the
telescope tube up or down by holding the tip of the optical tube
with hand to make sure that the telescope tube stops as you
release your hand.
Repeat the above procedure until the telescope tube is balanced
and it remains stationary. Tighten the lock screw and safety
screw securely.
Caution :
Stand still Stand still
Lock screw
Safety screw
Lock screw
Safety screw
Optical tube Optical tube
12