IR illuminator (AI-101) Quick Installation Guide
2012/04/05
V1.0
7
Note:
a. There is only one DO connector on this Network
Camera. If the external IR illuminator is used, no
other DO devices can be connected.
b. When you check the “Turn on external IR
illuminator” option, a warning message will appear.
Click “Yes” to enable the IR illuminator. Please
note, however, all events about DO trigger in the
Event Setting will be cleared after enabling.
c. Once you enable the IR illuminator, the Digital
output option on the System page will be disabled.
d. Once you enable the IR illuminator, the Digital
output option on the homepage will be disabled.
※
If DO function is needed, please uncheck the
option in
the “Day/Night settings:”. Then the DO function
can be used again.
