IR illuminator (AI-101) Quick Installation Guide
2012/04/05
V1.0
2
Step 3:
a. Loosen the fixing screw of the stand (A, as
shown on the left). Adjust the angle and lean the
stand joint forward to its maximum.
b. Pass the AI-101 control cable and power cable
into the opening of the stand, as shown on the
left.
Step 4:
a. Pass the power cable through the bottom of the
stand (A, as shown on the left)
b. Pass the control cable to the opening of the
stand. (B, as shown on the left)
Step 5:
a. As shown on the left, take the components of the
waterproof connector from the Network Camera
stand pack.
A
B
A
