Vivotek AE-211, Руководство пользователя

Страница: 4 / 124

4
Wiring Diagram IV
Shown below is the wiring diagram for the window demister. A spare 6-way terminal block
is provided at the rear of the chassis for additional camera and lens connections.
H1, Heater
STAT.1 TURN OFF at 28 C
TURN ON at 18 C
B2, Blower
STAT.2 TURN OFF at 25 C
TURN ON at 35 C
O
O
O
O
12VDC X4
3.5A or 5A
24VAC or
80~260VAC Input
H.1
or
B.2
PCB.1
CHASSIS EARTH
COVER EARTH
FTB. 1 FS. 1
TB. 1
TB.2
STAT.2
STAT.1
SPA
R
E
PSU
TB.1 6 way terminal block
TB.2 3 way terminal block
FTB.1 Fused terminal block
STAT.1 18
°
C Thermostat
STAT.2 35
°
C Thermostat
H.1 Heater
PSU Power Supply Unit
P.C.B.1 Thermal control
circuit board
FS.1 3 Amp. Fuse
1. Pins 1, 2, 3, and 4 are DC 12V output for motor lens, siren, or speaker connecitons. If
they are not connected, remove cables from the connectors.
2. Pins 5 and 6 are DC 12V output for camera.
DC Output of PSU Connectors
H1. Heater
STAT.1 TURN OFF at 28°C
TURN ON at 18°C
B2. Blower
STAT.2 TURN OFF at 25°C
TURN ON at 35°C
Lines for
heater & blower
Pins 5 & 6
DC for camera
Pins 1 & 2
12V Output
Pins 3 & 4
12V Output
CHASSIS EARTH
COVER EARTH