VivoLink VL120017, Руководство пользователя

Страница: 13 / 28

HDBaseT Transceiver Set
9
4. Operations
4.1 Operations of front panel buttons
Transmitter has a channel switching button SOURCE/ AUTO on the front panel, through
which users can switch input source signals.
It supports both manual and auto mode. (Default: Auto switching) Press and hold the
button
SOURCE/AUTO for 5 seconds or send command
“
50770%
”and “
50771%
”
to
switch between the two modes.
Switching modes:

Manual switching mode
Long-press the button SOURCE/ AUTO for 5 seconds or more to enter manual
switching mode and the green indicator AUTO will extinguish. Press SOURCE/
AUTO to switch circularly between HDMI, DVI and VGA input signal source.
When the format of VGA input signal is CVBS or YPbPr, the manual mode cannot
be switched to manual switching mode automatically.

Auto switching mode
Under manual switching mode, long-press the button SOURCE/ AUTO for 5
seconds or more to enter auto mode, Transmitter will automatically recognize the
signal source device that it was last connected to as input source.
4.2 RS232 Control
As RS232 can be transmitted bi-directionally between Transmitter and Receiver, so it is
able to control Receiver from local or control Transmitter from remote.
4.2.1 Installation/uninstallation of RS232 Control Software

Installation
Copy the control software file to the computer connected with Transmitter or
Receiver.

Uninstallation
Delete all the control software files in corresponding file path.
4.2.2 Basic Settings
First, connect Transmitter with all input devices and output devices needed, then to
connect it with a computer which is installed with RS232 control software. Double-click
the software icon to run this software.
Here we take the software CommWatch.exe as example. The icon is showed as below: