VivoLink VL120017, Руководство пользователя

Страница: 7 / 28

HDBaseT Transceiver Set
3
auto-switching mode and the indicator AUTO will lights
green. Under this mode, the last signal source
connected to transmitter will be recognized as input
signal. Press and hold for 5 seconds or more again to
exit auto-switching mode.
⑤ OUTPUT
Connect to the INPUT port of Receiver with a CAT5e cable.
⑥
HDMI INPUT
Connect with HDMI source device.
⑦
DVI INPUT
Connect with DVI source device.
⑧ AUDIO INPUT
Connect with the audio input socket of DVI or VGA source
device, provide external audio signal for DVI or VGA video
signal.
⑨ VGA INPUT
Connect with VGA source device.
⑩
IR IN
Connect with IR receiver to collect infrared signal, work with
far-end IR OUT port.
⑪ IR OUT
Connect with IR Emitter to send infrared signal, work with
far-end IR IN port.
⑫ RS232
Serial port, 3-pin pluggable terminal block, supports
bi-directional RS232 control and pass-through function,
connect with the control PC or other devices needed to be
controlled.
⑬
DC 24V
Connect with DC24V 1.25A power adaptor (not necessary if
Receiver connects with power adaptor and the PoC button is
turned on).