HDBaseT Transceiver Set
7
Step6.
Connect HDMI displayer (such as HDTV) to
HDMI OUTPUT
port of Receiver
with HDMI cable.
Step7.
Connect DVI displayer to
DVI OUTPUT
port of Receiver with HDMI cable.
Step8.
Connect VGA displayer to
VGA OUTPUT
port of Receiver with HDMI cable.
Step9.
Connect audio device (such as AV amplifier) to the
AUDIO OUTPUT
port of
Receiver with audio cable.
Step10.
When using the bi-directional IR control, do the following.
a)
Connect an IR receiver to the
IR IN
port at either the Transmitter or the
Receiver.
b)
Connect an IR Emitter to the
IR OUT
port at the other end.
Step11.
HDBaseT Transceiver Set supports bi-directional RS232 control. Connect
control device (e.g. PC) to
RS232
port of Transmitter or Receiver, and then send
commands to control Transmitter or Receiver. Please refer to
4.2 R2323 control
for more details.
Step12.
Connect a DC24V 1.25A power adaptor to the
DC 24V
port of the transmitter;
and make sure the
switch “
PoC
“is turned on, the receiver will be energized
synchronously.
System Diagram shown in this manual are for reference only, more specific
schemes depend on real devices.
When the
IR IN
port receive t
he IR signal from IR remote, the IR signal can’t be
sent out via the
IR OUT of the
native unit.
When using PoC solution, the switch
“
PoC
” must be turned on.
Connect HDBT ports via straight-thru CAT5e/6 cable with TIA/EIAT568B standard
terminations at both ends.
3.4 Twisted Pair Cable Connection
The twisted pair used in this extender MUST be a straight-through cable.
TIA/EIA T568A
TIA/EIA T568B
Pin
Cable color
Pin
Cable color
1
green white
1
orange white
2
green
2
orange
3
orange white
3
green white
4
blue
4
blue
5
blue white
5
blue white
6
orange
6
green
7
brown white
7
brown white
Содержание VL120017
Страница 1: ...VL120017 HDBaseT Transceiver Set User Manual ...
Страница 28: ......
