vividtouch VTE-8400, Руководство по установке и эксплуатации

Страница: 50 / 69

49
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution
Image appears “ washed
out ” and / or dark areas app
ear too bright.
• Brightness is set too high. • Decrease the brightness setting.
Image is too dark. • Brightness and / or Backlight are
set too low.
• Increase the brightness and /
or backlight settings.
Images from an HDMI source do
not display.
• The resolution and frequency of
the video card in the computer
are not compatible with the
display.
• HDMI c ab le from source to
display is either defective or too
long.
• Select a compatible resolution
and vertical frequency (refer
to
Supported Timings on page
61).
• Try a known-good and / or
shorter HDMI c able.
Computer images do not
display correctly.
• The resolution and frequency of
the video card in the computer
are not compatible with the
display.
• Clock and Phase settings nee d
adjustment.
• Select a compatible resolution
and vertical frequency (refer
to
Supported Timings on page
61).
• Adjust Clocks and Phase
settings (refer to Phase - VGA
sources on page 45 and Clock
- VGA
sources on
page 45
).
Touch screen doesn’t
work. • Multi-touch controller host
computer is not connected
correctly.
• Host computer hardware or OS
incompatibility.
• See Figure 3-7.
• Refer to Enabling the
Touch Screen
on
page 31.
Should you require assistance with a suspected hardware fault, please contact the support line below. You will require
your unit serial number. The operator will attempt to diagnose any fault and will take action as appropriate.
UK Warranty Support
Tel. 08450 724 999
Email.
services@steljes.co.uk