vividtouch VTE-8400, Руководство по установке и эксплуатации

Страница: 34 / 69

33
Touch Screen Configuration Instructions
From the Windows Start menu, choose
Timelink -> TouchWin .
Product Information:
This area of the TouchWin configuration window contains a variety of information about the touch module: the product
type, firmware version and operating status. Should you ever need to contact Technical Support, this information will
help them answer your questions or resolve product performance issues.
Settings:
From this area of the TouchWin configuration window, you can change settings, calibrate the touch screen or reset the
product to its factory-default state.
The following paragraphs describe these settings in detail. When you are finished configuring the touch screen, click
Done to save your changes or Cancel to discard them.
• Mode:
Choose one of the following, then click Done .
• MultiTouch: This mode is available only in Windows operating systems that support multi-touch; the user can
interact with the display using multiple fingers simultaneously and independently of each other. (Refer to
Software Requirements (Multi-Touch Operation) , above.)
• Mouse: This mode simulates the mouse to process the touch points. Generally, this mode is single-touch. All of
the operating systems listed in the previous section (refer to Installing TouchWin Software on page 56) support
mouse mode.
Touch module information
Touch screen configuration
settings