background image

MAINTENANCE OF BATHTUBS

POSSIBLE PROBLEMS AND THEIR SOLUTIONS

10

Problem

Solution

•  The surface of the product is dull and/or 

scratched.

•  If you force the control handle too much the siphon wire could break. Therefore 

height adjustment should be made by turning the plug counter clock wise without 
forcing the handle.

•  Hair, soap, etc. could clog the siphon in time. Clean the siphon drain with a drain 

opener from time to time.

•  Check the silicone application between the bathtub and the wall

•  Check if the Wall hangers are installed on the wall or not. 
•  The wall hangers must be used in order to preserve the rigidity of the bathtub

•  If your product is new, the protective film layer on it might not have been 

removed.

•  If dullness/scratches occur after a certain period of use, you may be using 

incorrect cleaning materials. See the 'Cleaning’ section.

•  My bathtub stretches

• Water leakage under the bathtub

•  The siphon drain of my bathtub clogs frequently.

•  The siphon plug does not open even though the 

control handle is forced.

If your problems persist please contact the nearest VitrA-Artema Authorized Service.

MATTERS THAT REQUIRE ATTENTION!

•  Acrylic is durable against acids and alkalines.However do not let organic solutions used in dry cleaning, paint remover substances, 

acetone  or other solvents to your compact system.

•  Keep lighted cigarettes away from the product.

•  If the construction activities in the bath will continue after installation, do not remove the folio layer on the product and apply full 

protection to the product.

CLEANING THE ACRYLIC BATHTUBS

•  Right after you use your bathtub, clean it with a liquid bath cleaner or a decalcifier and a soft cloth and warm water. Otherwise 

unwanted soap products, dirt and hard water will create a thin layer on the acrylic surface and it will become more difficult to clean.

•  Do not use hydrochloric acid, abrasives, powdered detergents and cream detergents that contain powders, soft soap and 

hard/scratching cleaning sponges for cleaning your bathtub.

Note: 

When products with cabins, particularly patterned products are concerned, clean the glasses with a soft cloth and warm water. 

Do not use hydrochloric acid, abrasive / powdered / liquid detergents soft soap or hard/scratching cleaning sponges. Do not let organic 
dilutions, paint removers, acetone and other solvents contact the glass.

Содержание Neon

















Отзывы: