VITRA Neon, Руководство пользователя

Страница: 15 / 16

Use, Cleaning and Maintenance
1- Deformations and failures on the surface, electronic parts due to practices other than the use functions specified in the User
Guide,
2- Deformations and dullness occurring on the surface of products wiped with cleaning substances containing acid and cleaning
substances containing abrasive powders,
3- Deformations and dullness occurring on the surface of products wiped with rough cleaning substances (wire sponge, hardened
sponge, etc.),
4- Deformations that welding electrode sparks, flammable substances during alterations made in the bathroom spaces and
cigarettes may cause on the product surface,
5- Failures occurring due to use of parts other than original spare parts,
shall be treated out of scope of the warranty.
Shipping, Storage
1- Deformations to the product surface during the shipping and transportation carried out after the products are delivered or any
breakages which may occur as the result of impacts,
2- Deformations and breakages on the surfaces of products which remain at the construction site for a long time without
protection,
3- Damage to the product as the result of effects of the water and/or humidity in the environment during the storage and use of the
products,
4- Products damaged by each other due to stacking on top of each other during storage,
shall be treated out of scope of the warranty.
Installation
1- Failures which occur as the result of incorrect installation, maintenance, repairs and disassembly performed by unauthorized
persons,
2- Factors which impact the installation of the product, resulting from the wall or floor not being level, or hot-cold water, waste
water drain installments not complying with the infrastructure measurements given in the technical data sheets.
3- Surface deformations and failures occurring due to small particles in the plumbing (stone, sand, gravel, etc.) and encrustation,
4- Failures occurring due to the wall structure being different than the specified types.
5- Failures occurring due to the utility system pressure not being at the required value.
6- Failures occurring due to faulty electrical installment (such as unearthed cable, voltage fluctuations)
7- Failures occurring where the holes required for on-bathtub armature application are drilled by people other than the
manufacturer or the authorized services.
8- Failures occurring due to not establishing the ventilation valve and drain which must be established in built-in applications.
shall be treated out of scope of the warranty.
DEFECTS NOT COVERED UNDER WARRANTY
Eczacıbașı Yapı Gereçleri San. Ve Tic. A.Ș.
Reserves the right to make any technical changes on the product without prior notice