VITO PRO-POWER VIMLSF12, Инструкция по эксплуатации

Страница: 13 / 24

EN
13
CAUTION
Read the operating instructions to
reduce the risk of inquiry.
Wear ear-muffs.
The impact of noise can cause
damage to hearing.
Wear a breathing mask.
Dust which is injurious to health can
be generated when working on wood
and other materials.
Never use the device to work on any
materials containing asbestos!
Wear safety goggles.
Sparks generated during working or
splinters, chips and dust emitted by
the device can cause loss of sight.
Store the battery only in dry rooms
with an ambient temperature of
+10°C to +40°C. Place only charged
batteries in storage.
IMPORTANT
When using the equipment, a few
safety precautions must be observed
to avoid injuries and damage.
Please read the complete operating
instructions and safety information
with due care. Keep these operating
instructions in a safe place so that
the information is available at all
times. If you give the equipment to
any other person, hand over these
operating instructions and the safety
information as well. We cannot
accept any liability for damage
or accidents which arise due to a
failure to.
SAFETY INFORMATION
Please refer to the booklet included
in delivery for the safety information.
CAUTION
Read all the safety regulations and
instructions.
Any errors made in following the
safety information and instructions
set out below may result in an
electric shock, fire and/or serious
injury.
Keep all safety information and
instructions in a safe place for future
use.
ADDITIONAL SAFETY
INSTRUCTIONS
This tool may only be used for dry
grinding/sanding operations.
Always guide the power cable away
from the back of the tool.
Use of the tool on materials
containing asbestos is prohibited.
Always remove the plug from the
power supply socket before carrying
out any work on the machine
(cleaning the sander, changing the
sandpaper, etc.).
Always disconnect the machine by
removing the plug from the socket,
not by pulling on the power cable.
To protect your health, always wear
safety goggles and a dust mask
during sanding work.
Keep your workplace clean and well
illuminated.
Make sure that the work piece is
sufficiently secured so that it cannot
slip.
Keep children away.
For your own sake, keep the machine
clean at all times and check it for
signs of damage each time after
using it.
Make sure that the switch is set to
OFF before you insert the plug into
the power supply socket.
Make sure of your footing,
particularly when working on ladders
and platforms.
Touching or inhaling this dust can be
harmful for the operator and other
persons nearby.
If you discover any damage to the
machine, use the exploded diagram
and the spare parts list to determine
which parts need to be ordered from
customer Service.
Important! Wear safety goggles and
a dust mask.
LAYOUT (FIG. 1)
1. ON/OFF switch.
2. Tool chuck.
3. Battery charger.
4. Speed controller.
5. Allen key for changing tools.
6. Battery.
7. Scraper.
8. Triangular sanding/grinding plate.
9. Pushlock button.
10. HSS saw blade.
ITEMS SUPPLIED
Open the packaging and take out the
equipment with care.
Remove the packaging material and
any packaging and/or transportation
braces (if available).
Check to see if all items are present.
Inspect the equipment and
accessories for transport damage.
If possible, keep the packaging until
the end of the guarantee period.
IMPORTANT
The equipment and packaging
material are not toys!