B
BL
LA
AC
CK
K
Y
YE
EL
LL
LO
OW
W
M
MA
AG
GE
EN
NT
TA
A
C
CY
YA
AN
N
7
CONNECTING TO A VIDEO SOURCE
BNC VIDEO CONNECTION
(#9 on Previous Page)
1)
Connect a coaxial BNC cable between the BNC VIDEO IN on the monitor and the OUT terminal on the device. An
additional device (monitor, recorder, ETC.) can be connected via VIDEO OUT.
2)
Connect a set of RCA audio cables between the A/V-IN (L, R) on the monitor and the out terminals on the device. For
non-stereo audio sources, connect a single cable from the device to the Left A/V IN Connection.
3)
Use the VIDEO button on the front of the monitor to select the VIDEO source.
NOTE:
When using the BNC VIDEO IN the RCA/S-Video Connections are not available.
STANDARD / S-VIDEO CONNECTION
(#4 & #5 on Previous Page)
1)
The A/V video connection can utilize an S-Video or Standard (RCA) video source, but not both simultaneously. Either
connect a S-Video cable between the S-Video IN on the monitor and the OUT terminal on the device or connect an RCA
cable between the A/V Video IN on the monitor and the OUT terminal on the device .
2)
Connect a set of RCA audio cables between the A/V-IN (L, R) on the monitor and the out terminals on the device. For
non-stereo audio sources, connect a single cable from the device to the Left A/V IN Connection.
3)
Use the VIDEO button on the front of the monitor to select the A/V source.
NOTE:
When using the RCA/S-Video Connection the BNC VIDEO IN is not available. The RCA and S-Video inputs can
not be used simultaneously.
COMPONENT VIDEO CONNECTION
(#2 & #3 on Previous Page)
1)
Connect a set of RCA cables between the DVD IN connections on the monitor and the OUT terminals on the device.
2)
Connect a set of RCA audio cables between the DVD AUDIO (L, R) on the monitor and the out terminals on the device.
3)
Use the VIDEO button on the front of the monitor to select the DVD source.
D-SUB / PC CONNECTION
(#6 & #7 on Previous Page)
1)
Ensure that the power is turned off on both the monitor and output device (PC, DVR, ETC.)
2)
Connect a 15-Pin D-SUB cable between PC VIDEO IN on the monitor and the device.
3)
Connect a 3.5mm audio cable between PC AUDIO IN on the monitor and the device.
4)
Use the VIDEO button on the front of the monitor to select the PC source.
Содержание VTM-LCD203P
Страница 16: ...16 TROUBLESHOOTING ...
Страница 18: ...18 NOTES ...
Страница 20: ...28492 CONSTELLATION ROAD VALENCIA CA 91355 WWW VITEKCCTV COM 888 VITEK 70 ...