ENVI Series: VTD-MV-VN / VTD-MV-VRN
44
14.3.
PPPoE Configuration
PPPoE is used to connect VITEK products to a PPPoE modem provided by the ISP. Since PPPoE
needs verification, ID and a password are necessary to access the network. Type in PPPoE user ID
and password
14.4.
Network Ports
In this configuration, you set up the HTTP port for VITEKcameras to communicate with the Client
PC. HTTP Port is the network port that is used when a Client PC connects to the VITEKcamera Web
page. It can be assigned between 80 and 65535.The default value is 80.
Note: If the HTTP port number is changed to a differentvalue than default (80), make
sure the new HTTP port number goes together with the VITEK camerasIP address.
For example, when a VITEK cameras IP address is 192.168.1.100and the HTTP
portis 8080, you will have to enter http://192.168.1.100:8080 to connect to the
camera.
Содержание VTD-MV-VN
Страница 22: ...ENVI Series VTD MV VN VTD MV VRN 21 Click on the Finish button to close the window ...
Страница 122: ...ENVI Series VTD MV VN VTD MV VRN 121 Group Circulation Start sequencing between groups ...
Страница 125: ...ENVI Series VTD MV VN VTD MV VRN 124 Enhanced Draw Mode On Off Enhance image for a better reproduction ...
Страница 138: ...ENVI Series VTD MV VN VTD MV VRN 137 ...