Vitek VT-8312, Инструкция по эксплуатации

Страница: 3 / 32

3
ENGLISH
IRON VT-8312
The iron is intended for ironing clothes, bedding
and for vertical steaming of fabrics. This iron
model can be used in two versions both with the
power cord and without it.
DESCRIPTION
1.
Water spray nozzle
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Water spray button
5.
Burst of steam button
6.
Heating element on/off /iron automatic
switch-off indicator
7.
Detachable iron base
8.
Detachable base lock
9.
Power cord protection
10.
Water tank
11.
Temperature control knob
12.
Self-clean button «Self Clean»
13.
«max» maximum water level mark
14.
Iron soleplate
15.
Beaker
ATTENTION!
For additional protection you can install a resid-
ual current device (RCD) with nominal opera-
tion current not exceeding 30 mA into the mains;
contact a specialist for installation.
SAFETY PRECAUTIONS
Before using the electrical unit, thoroughly read
through this instruction manual and keep it for
future reference.
Use the unit for its intended purpose only, as
specified in this manual. Mishandling of the unit
may lead to its breakage and cause harm to the
user or damage to his/her property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
iron operating voltage.
•
The power cord is equipped with a euro plug;
plug it into the socket with reliable ground-
ing contact.
• To avoid fire, do not use adapters for plug-
ging the unit in.
•
To avoid mains overloading, do not switch on
several electrical appliances with high power
consumption at a time.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals, etc.
ATTENTION! The surfaces of the iron get hot
during operation. Avoid contact of open skin
areas with the iron hot surfaces or outgoing
steam to avoid burns.
• Do not let the power cord be on the ironing
board and touch hot surfaces.
• Do not leave the unit unattended. During
breaks in operation, put the iron on the base
(in a vertical position).
• Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off.
•
Always unplug the iron if you are not using it.
•
To unplug the iron always hold the power plug,
never pull the power cord.
•
To avoid electric shock, do not immerse the
iron, the power cord and the power plug into
water or any other liquids.
•
Before taking the iron away, let it cool down
completely and pour out the remaining water.
•
Clean the unit regularly.
• Do not touch the unit body and the power plug
with wet hands.
• Do not allow children to touch the unit body
and the power cord during the unit operation.
• Do not leave children unattended to prevent
using the unit as a toy.
• For children safety reasons do not leave
polyethylene bags used as packaging unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
Close supervision is necessary when children
or people with disabilities are near the oper-
ating unit.
•
This unit is not intended for usage by chil-
dren.
•
During the unit operation and breaks between
operation cycles, keep the unit away from
children.
• The unit is not intended for usage by persons
with physical or mental disabilities (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
• Regularly check the integrity of the power
cord.
IM VT-8312.indd 3 27.12.2018 10:58:30