Vitek VT-8210 BK, Инструкция по эксплуатации

Страница: 5 / 32

5
ENGLISH
•
Never use the unit if the power cord or the power plug
is damaged, if the unit works improperly or after it was
dropped.
•
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
•
For environment protection do not discard the unit with
usual household waste after its service life expiration;
apply to a specialized center for further recycling.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE
ONLY
USING THE HAIRDRYER
After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
– Before switching the unit on, make sure that your
home mains voltage corresponds to the unit operat-
ing voltage.
– Remove any stickers that can prevent unit operation.
– Unwind the power cord completely.
– Insert the power plug into the mains socket.
– Select the required operation mode using the
switch (1):
« 0 » – the hairdryer is switched off;
« » – hot air supply
« » – supply of hot air at maximal flow speed.
Note: During the first operation some foreign smell and a
small amount of smoke from the heating element is pos-
sible, it is normal.
– After unit operation, switch the hairdryer off by setting
the switch (1) to the position « 0 », and unplug it.
IM VT-8210_70x130.indd 5 28.08.2017 16:48:19