Vitek VT-8210 BK, Инструкция по эксплуатации

Страница: 6 / 32

6
ENGLISH
Overheating protection
Overheating protection switches the hairdryer off if the
outgoing air flow is too hot. If the hairdryer switches off
during operation, set the operation mode switch (1) to the
“
0 ” position, unplug the hairdryer and make sure that the
inlets and outlets are unblocked. Let the hairdryer cool
down for 5-10 minutes and switch it on again. Do not block
the air inlets during unit operation and avoid getting of hair
into its air inlet.
CLEANING AND CARE
– The hairdryer is intended for household use only.
– Set the switch (1) to the position «
0 » and disconnect
the hairdryer from the mains.
– You may wipe the unit body with a damp cloth and then
wipe it dry.
– Clean the air inlet grid (3) with a brush.
– Never immerse the unit into water or other liquids.
– Do not use abrasives and solvents to clean the unit
body.
STORAGE
– Unplug the hairdryer if you are not using it.
– Let the hairdryer cool down after its usage, keep the
unit away from children in a dry cool place.
– Never wind the power cord around the hairdryer, as
this can damage the cord. Handle the power cord with
care, do not pull, twist or stretch it, especially near the
power plug or at the junction point. Straighten the cord
periodically if it gets twisted.
– For easy storing there is a hanging loop (5), you can
hang the unit on this loop provided that no water gets
on the unit in this position; you can fold the handle (4)
to minimize the hairdryer size.
DELIVERY SET
Hairdryer – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V, ~ 50/60 Hz
Maximum power consumption: 1200 W
IM VT-8210_70x130.indd 6 28.08.2017 16:48:19