Vitek VT-8210 BK, Инструкция по эксплуатации

Страница: 3 / 32

3
ENGLISH
HAIRDRYER VT-8210 BK
The hairdryer is intended for hair drying and styling.
DESCRIPTION
1.
Operation mode switch (0\ \ )
2.
Nozzle of the air flow
3.
Air inlet grid
4.
Foldable hairdryer handle
5.
Hanging loop
ATTENTION!
– After using the hairdryer in a bathroom, disconnect the
power plug from the mains socket, as water closeness
is dangerous even if the unit is switched off.
– For additional protection you can install a residual cur-
rent device (RCD) with nominal operation current not
exceeding 30 mA into the bathroom mains; contact a
specialist for installation.
SAFETY MEASURES
Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as specified
in this manual. Mishandling of the unit may lead to its
breakage and cause harm to the user or damage to his/
her property.
•
Before switching the unit on, make sure that voltage of
the mains corresponds to unit operating voltage.
•
To avoid the risk of fire, do not use adapters for con-
necting the hairdryer to the mains.
•
It is recommended to unwind the power cord to its full
length while using the unit.
•
The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used as a handle for carrying the unit.
• Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Apply the hair spray only after hair styling is finished.
•
Never leave the operating unit unattended.
IM VT-8210_70x130.indd 3 28.08.2017 16:48:19